How Long Does It Take To Remove Mold?

Twin Home Experts mold removal team has performed over 3,000 mold mitigation jobs, and one of the biggest questions & concerns we often receive is, “Twins, How long is this job going to take? “

The top factors that dictate the time it will take for mold remediation:

1- What caused your mold?

was it a sewer wastewater cause OR a Freshwater cause?

*If sewer wastewater was the cause of the mold, you can expect to add another 2 to 7 days to any mold removal project.

2- Is it just surface mold? How large of an area?

Expect : 3 hours for small areas to 2 days for larger areas for surface mold removal

3- Where is the mold located…….?

MOLD REMOVAL ATTICS:

Expect: 1 day for small areas to 7 days for large areas inside of an attic

MOLD REMOVAL CRAWL SPACES:

Expect: 1 day to 10 days depending on the size of the area in need of treatment, also is it a tight crawl space or plenty of working rooms.

MOLD REMOVAL

TUB & SHOWER:

Expect 2 hours to 1 day depending on how thick the biofilm is.

MOLD REMOVAL

BEHIND KITCHEN & BATHROOM CABINETS :

Expect: 1 to 4 days for removal

MOLD REMOVAL INSIDE WALLS OR CEILINGS :

Expect 1 to 4 days depending on how much materials need to be removed and the accessibility.

MOLD REMOVAL BEHIND A WATER HEATER :

Expect: 1 to 2 days

Easy access to OR difficult access?

MOLD REMOVAL UNDER KITCHEN Or BATHROOM SINKS :

Expect: 1 day to 3 days

MOLD REMOVAL INSIDE OF AN ENTIRE HOUSE:

Expect: 4 to 9 days, depending on the size of the home and how much contents are inside this is for an average Los Angeles home of 2800 sq ft

MOLD REMOVAL FROM HVAC & DUCTING SYSTEM:

Expect: 2 to 4 days

CAN MOLD REMOVAL ACTUALLY BE DONE IN ONE DAY?

Mike B. Long Beach Ca.

Yes, absolutely. Using the proper equipment and antimicrobial you can achieve great results in just one day.

WHAT IS THE PROCESS OF MOLD REMOVAL?

Samantha W. Studio City CA.

The process of mold removal is :

1- Wear proper personal protective equipment

2- Build critical barrier or tightly sealed containment using a 6 mil poly plastic

3- Place Air Scrubber with pure HEPA filtration.

4- Perform Hepa vacuuming to contamination and within containment.

5- micro mold wet wipe down using certified anti-microbial

6 – Cut, Remove, bag, and dispose of all compromised materials

7- Perform electrostatic fogging using a mold neutralizer.

8- Conduct a post-mold test to verify all mold has been successfully removed using a third party accredited mold lab.

HOW LONG DOES IT TAKE TO REMOVE MOLD OFF OF WOOD?

Dave H. Monrovia CA.

We are certified in a rapid mold agent, it literally takes a few minutes for smaller areas and a few hours for large areas, so depending on the technique, will determine the time it takes.

In addition, how thick the mold growth is on the surface will also determine the time of removal.

Get Help With Your Mold Remediation Today.

Mold removal on average as you can see can take about 2 to 3 days, you want to make sure that you have the proper equipment, materials in order to be efficient and most of all very thorough. Make sure you hire the right company for your mold removal issue, and request a timeline on the agreement, so you can hold them accountable.

Hope this post answered all your questions, need further assistance, please contact the Twins today (866) 544-0120. We’re here to help, as always, thank you for visiting our site today.